Currently installed is a recent (about 10 years) Harbor Bay 5 blade ceiling fan with 44" blade diameter.
In a box I have a recent (about 10 years) Harbor Bay 5 blade ceiling fan with 52" blade diameter.
Yes, the large blades will run the motor harder.
Would these two fans likely use the same motor, so that I can just swap the larger blades and leave the current motor? Or is there a high chance the motors are sized specific to their blades, and I would need to fully swap the motor to use the larger blades?
The blades appear to use the same connection.
I think you should just give the longer blades a try.
Motor is same. Mounting hole spacing is different.
Thanks.
Darn. I just eyeballed the difference. I’ll try actually screwing in just 1, but I’ll go in expecting the difference.