I spent all day today trying to get the routing to work correctly between Tailscale, Nginx and Adguard.
Basically I wanted to be able to be able to use **http://immich.network ** to route to 192.168.1.2:9000
I wanted to share the steps I took so people don’t have to go through what I did.
First a few things Local Server IP: 192.168.1.2
- I installed Ngnix and Adguard, in a Docker Containers, and gave Adguard IPs 3000, 3001 instead of 80 and 443 because Ngnix took it.
- I went to my router and made it use the DNS: 192.168.1.2
- I configured Proxy Host in Ngnix … immich.network => 192.168.1.2:9000
- I configured DNS rewrite in Adguard … *.network => 192.168.1.2
At this point I was able to use http://immich.network finally. I installed Tailscale to be able to access when I’m outside but http://immich.network didn’t work.
These helped me https://tailscale.com/kb/1019/subnets + https://tailscale.com/kb/1054/dns?q=global+nameserver
- I created a subnet… tailscale up --advertise-routes=192.168.1.0/24
- I approved it on Tailscale login
At this point I was able to access home server using its local IP 192.168.1.2 but I couldn’t get http://immich.network to work.
- I created a nameserver dns with split DNS but I used my local ip… 192.168.1.2 => network
Finally everything is working… I have a feeling that I’m doing it wrong but I’m too tired and it’s finally working.
Congrats on getting everything working - it looks great!
One piece of (unprovoked, potentially unwanted) advice is to setup SSL. I know you’re running your services behind Wireguard so there isn’t too much of a security concern running your services on HTTP. However, as the number of your services or users (family, friends, etc.) increases, you’re more likely to run into issues with services not running on HTTPS.
The creation and renewal of SSL certificates can be done for free (assuming you have a domain name already) and automatically with certain reverse proxy services like NGINXProxyManager or Traefik, which can both be run in Docker. If you set everything up with a wildcard certificate via DNS challenge, you can still keep the services you run hidden from people scanning DNS records on your domain (ie people won’t know that an SSL certificate was issued for immich.your.domain). How you set up the DNS challenge will vary by the DNS provider and reverse proxy service, but the only additional thing that you will likely need to set up a wildcard challenge, regardless of which services you use, is an email address (again, assuming you have a domain name).
Thank you for the* so much wanted advice, it’s one of the reasons I actually posted this, to get advices on how to do things better.
I’ve been trying to do that for a specific service running (firefly) but I can’t figure out what to do exactly, about the domain name, Is there a way to do that without one?
You can get pretty cheap domain names if you google around. I managed to get mine for £35 for a number of years (3 I think, I was high when I set it up) and got a .com name out of that.
You could look into DuckDNS. I know I used them many moons ago for Home Assistant but can’t quite remember what the capabilities were, I just remember it was free and a bit rubbish. But as a stopgap it works.
Try that for a bit until you have a few quid spare, then get yourself a domain name paid for a while.
I used dynv6.com to get a free subdomain e. g. [name].dynv6.net and then a swag docker to do the reverse proxy subfolder->dockerport matching. Trafic in my home network is http and the swag ports are the only one exposed to the public. When I find the time I’ll do in depth setup guide including the ipv6 setup problems.
ok I just did that and my problem is that I wanted to access my services with a custom domain like .homes
Now I need to access them for x.y.duckdns.org
Have a look into Heimdall or Homarr. Much easier, don’t need to worry about addresses at all. Single set up and add Tailscale exit node for external access.
I’ve been fiddling with it again today and (using Homarr) my only services that don’t work when I access through Tailscale are the ones I use names for (are.local, server.local, etc) and I can access them when I use the IP:port so when I get home I’ll just change them to IP:port on Homarr and I’ll be all good
Yea I’m using Homarr, I’ve just finished setting everything up. The only problem I have right now is that I can’t access Syncthing GUI through the domain.
ok I just did that and my problem is that I wanted to access my services with a custom domain like .homes
Now I need to access them for x.y.duckdns.org
@Mir @rhymepurple Another place you can get free domain names is freedns.afraid.org - they have been around nearly forever and all you have to do is log into their site and go to any page once every six months (I guess so they know you are still alive) but they will email you a notice a couple weeks before that time is up. And at least for me they have always been very reliable.
Thank you, Might try them because duck dns domain is flagged by the browser for some reason and it’s worth than no https warning
Congrats !!!
Only one day? Lucky you ! It took me a whole week to get it to work with self-signed ssl certificate behind Traefik + docker + Adguardhome.
Adguard home rewrites and the correct certificate configuration solved most of my isues (android can be picky with self-signed root certificates). But I learned ALOT through the whole week, so I didn’t waste my time :).
I hope you too learned alot :) but if I may, I would switch from AdguardHome to Pi-hole.
I know… AdguardHomes functionalities and UI are awesome and overpass Pi-Holes’ but since I saw they add some strange trackers and very sketchy DNS request in their AdguardVPN android application, I don’t trust them anymore !
I hope you too learned alot :) but if I may, I would switch from AdguardHome to Pi-hole.
+1
- pi-hole rocks! :)
It does !! I really like it and was easy peasy to make the switch. But I have to admit, AdguardHome’s UI and DNS logs are way more detailed and I’m missing a few features I used with AGH. But nothing to critical that makes pi-hole unusable in my workflow !
But yeah, they do not have the same budget… That’s a good tradeoff i’m willing to take for my privacy :).
And one day, when I get a job I will surely donate to them.
I just finished the SSL today, but have you gotten Syncthing GUI to work though? I can’t seem to get it to work with the domain for some reason.
Hummm, I have a syncthing instance in a docker compose, so yeah I can access it through my ssl domain (https://syncthing.home.lab) but traefik takes care of everything.
Now if it’s on your local machine you’re trying to use your SSL certificate I don’t know, I always access it through the local ip (127.0.0.1:8384).
If I had to guess or give it a try, I would point the IP to my dns through my host file on my machine. But that’s just a wild guess :/
I think syncthing has a good documentation about it :)
You could use split DNS on your router (or wherever your DNS is) so that when you visit the syncthing address on your local network, you’re being directed to traefik.
I use a domain override in pfsense for syncthing.myhomelab.com which points to my reverse proxy’s local IP.
I can access using the local ip but I can’t access using the ssl domain, I can access it but I can’t login for some reason. I can’t figure out how to fix it
If you only access your local domain name inside your LAN and via VPN you can also use Caddy to have local SSL certificates https://caddyserver.com/docs/automatic-https#local-https Have not tried this myself yet but I like the idea of not getting any warnings in browser, and this is safe as long as the Caddy CA root certificate is safe.
That looks great, I may switch to it from nginx, thank you
I also host all my stuff on 192.168.1.2. It’s just my gaming pc with a bunch of services for piracy but it’s good enough until I can build a proper server in the future.
Mine isn’t a proper server, it’s just an old desktop
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters CA (SSL) Certificate Authority DNS Domain Name Service/System HTTP Hypertext Transfer Protocol, the Web HTTPS HTTP over SSL IP Internet Protocol SSL Secure Sockets Layer, for transparent encryption VPN Virtual Private Network VPS Virtual Private Server (opposed to shared hosting) XMPP Extensible Messaging and Presence Protocol (‘Jabber’) for open instant messaging nginx Popular HTTP server
10 acronyms in this thread; the most compressed thread commented on today has 6 acronyms.
[Thread #719 for this sub, first seen 28th Apr 2024, 06:25] [FAQ] [Full list] [Contact] [Source code]
I used chatgpt to create the exact steps, commands and configurations I needed for my setup and achieved this the seemingly cheatful way. I used nginx and certbot. Worked like a charm. Congrats!
I used chatgpt to create the exact steps, commands and configurations I needed for my setup and achieved this the seemingly cheatful way. I used nginx and certbot. Worked like a charm. Congrats!
It’s impressive that you was able to get it to help you correctly. It usually just spew things i need to fix that’s why I didn’t ask him, thank you for the tip.
Btw did you use a custom local domain name or did you use an actual domain ?
Thanks, it took some prompts but it worked in the end! I used a few subdomains of an actual domain I use for email…
I just finished the SSL today, but have you gotten Syncthing GUI to work though? I can’t seem to get it to work with the domain for some reason.
No, sorry I haven’t tried it with Syncthing. Mainly using it for immich, seafile, a matrix server, some arr apps and a status monitor called dashdot. Would be useful for syncthing though, never thought of trying it - I’ll give it a shot over the weekend and let you know how it goes!
Thank you, looking forward to hearing from you
Hello again.
I’ve gone through your steps outlined in this post now for LAN. I’ve made my own network name .crypt and added *.crypt to Adguard and pointed it at the IP address of Nginx.
I’ve then gone and mapped my local services in Nginx. So radarr.crypt sonarr.crypt plex.crypt etc and mapped them to ports.
Now what I enjoyed was that I had to map Adguard to forward to Nginx, but in Nginx I can use the IP address of anything on my network, not just on the host.
So it’s map Adguard in DNS rewrites to Nginx IP, then map the IP:ports in Proxy Hosts in Nginx.
Now when I use my Tailscale exit node (that I have from Home Assistant) I can use those addresses outside the house.
I have noticed it only works for the .crypt domains, and not .local despite being set up as well. I guess because .local is a special address it is harder to map to Tailscale.
Anyway, it’s working for me after following what you’ve done, I just did less in Tailscale because of the exit node
This exactly what I’m trying to do, get valid https certificates via a domain name on cloudflare. I have nginx proxy manager running and working to serve a couple of sites like home assistant. The problem I’m having is how do I get valid certificates for my internal services via npm but only be able to access them inside my lan not the internet?
https://www.youtube.com/watch?v=qlcVx-k-02E This really helped me
Here is an alternative Piped link(s):
https://www.piped.video/watch?v=qlcVx-k-02E
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source; check me out at GitHub.
I’ve been wanting to do exactly what you’re doing here on my LAN for a while. I tried to do it on Friday using Zoraxy and managed to get Homarr running on server.local but couldn’t get anything else running with a name (overseerr.server.local and server.local/overseerr just wouldn’t work, although I did get a webpage on server.local/overseerr it wouldn’t resolve properly).
Anyway as to your second point of getting a nameserver in Tailscale. While I haven’t managed to get a nameserver in Tailscale I have managed to get apps running through Tailscale.
My app was Audiobookshelf. I wanted to be able to just turn on Tailscale on my phone and sync to Audiobookshelf and managed to do just that.
I already connected Audiobookshelf at home with it local IP.
I then spun up a Tailscale container in the docker host that Audiobookshelf was on, signed in to it on the Tailscale dash, then just added the Tailscale network in Docker to the Audiobookshelf docker container.
Now I can turn on Tailscale when I’m out of the house and open Audiobookshelf app and it connects to my.home server.
Meaning I don’t need to remember the IP address and portz I set that up once in the Audiobookshelf app and connect to it at will.
I intend to have a go at attaching it to Syncthing next. I don’t have much use case for Syncthing at present so it’s a perfect app to experiment with. I intent to just attach the Tailscale network to my Syncthing container and just see if it connects. Then I’ll try syncing my Keepass database to my host as an experiment from my phone.
In my head it should be that simple. If it is I’ll just connect all my docker apps that way and spin up another Tailscale instance on my other VM that does my Arr, and I’ll have outside access to everything.
Another point to give you for your quest: if you set up Heimdall and a Tailscale exit node, you can put all your self hosted apps in Heimdall for ease of access and then just hit that through your Tailnet. I have a shortcut on my phone home page. You can then just click the service you want in Heimdall and go to that service.
Edit: turned off the exit node I had running inside Home Assistant and now nothing works. Turns out it wasn’t as easy to connect to the Tailnet as I thought, and I must have been hitting audiobookshelf through my Tailscale exit node after all. But that does mean that my final paragraph still stands, exit node plus a home page (Heimdall, Homarr) gives the same results, but without the nameservers.
Now I can turn on Tailscale when I’m out of the house and open Audiobookshelf app and it connects to my.home server.
I did all this because I wanted to use the same address for home and tailscale
Heimdall
I think that’s what I’m currently doing with Homarr
Ah ok you know everything I do then, carry on.
I just click the “install” button on Yunohost 🤷
I’ve just looked this up. So is Yunohost supposed to replace Proxmox or can I install it as a service in Proxmox? Will it run in Docker?
I’d have a go at installing it if my 10 year old wasn’t saving democracy on my PC at the mo (playing Helldivers 2) there’s no way I can prize him off that just to tinker with and ultimately uninstall, another service for a few hours. I got shit to do today.
No, Proxmox is a hypervisor. This is just a server management tool.
You can install on a Debian 11 VM, absolutely.
Interesting, I may do just that for the lulz
Yunohost is doing the installation and finishing with having a XMPP and email server, and from there you can install apps on top of that. You can play with Yunohost inside a container if you wanted to but you will have to prepare the proxy in front of it. If you want to try Yunohost the easiest way, rent a VPS for it.
