I’ll just start! Personally, I’m tinkering with my local network to create a subnet for my homelab.

I want to set up Lemmy and Audiobookshelf next, but I want to tweak the infrastructure a bit before hosting more stuff.

Before the firewall thing, I set up authentik and am integrating it in more services. Migration was mostly straightforward so far in Bookstack and Paperless. Also the proxy authentication is pretty cool, finally being able to ditch basic auth in Prometheus was cool.

2012 macbook pro in the cupboard as server. Put nixos on it and it flies now, only wish the Magsafe connection was a bit more stable.

Its got gigabit so should be good.

I’m currently reconsidering using a couple mikrotik for some layer 3 hardware offloading.
Not really homelab, but close.

I have a project that gets integrated with another network for an event. I’m thinking of using 2x crs504 (cause I’m using mlag for servers, think vrrp or whatever for “public” (it’s all internal) ip) and seeing if I can get l3hw working as a router.
While I could sit on a subnet of the “host” network, having a gateway that traffic goes through allows me to test and prove everything for my system in my homelab, with just the final integration being a do-in-a-time-crunch problem.
I’m already using the crs504s for networking (I bought them ages ago, thinking 25gbps was going to be as easy as 10gbps. It’s all running at 10gbps), and this saves having to use something as a router, cuts down on rack space, all sorts of benefits. I think.
Anyone have any experience with mikrotik l3hw offloading?

My actual homeland is just a NAS and some networking. It’s a small flat, it’s just me. Not complicated, no need to give me more headaches!

I just set up some geofencing on pfsense, found alot of traffic that I didn’t know was happening. That freaked me out.

Updated my NAS recently and Immich’s database stopped working due to some PostgreSQL update that needs something changed manually, so I need to get my head around that.

Also trying to get a tablet to run as a 2nd satellite for HomeAssistant voice commands and no matter what I do, only the 1st one responds to wakeword… but I tend to give up after everyone’s gone to bed as I’m literally in a room on my own talking to myself…

I kinda-sorta finalized my migration to a smaller setup with my mail+web server. I’ve been running a small MSP business for several years and as customers flee right and left mostly to microsoft (due to 365 setup pricing) it’s been in a decline for quite a while. So, I finally pulled the plug and shut down the business side of things and downscaled that to a single VPS with a handful of domains, email service and a few simple wodrpress sites.

Also I kinda-sorta moved all of my photo archive of 20+ years to immich and set up a backup scheme for it, which is now (only) 2-1-1. I also need more storage for that thing, but it needs to wait for few days until paycheck and after that migration I can finish importing all the photos I have laying around. That also requires some reconfiguration of my disk arrays, copying couple of terabytes from system to another and back again, but that’s relatively easy thing to do, but it takes “a while” to accomplish.

After that there’s a long list of things to do, but mostly I’ll spend my free time and money to improve the current setup as quickly as possible in the immediate future.

I set up Affine and Kanboard to help with various projects. I got fed up of Notion, Trello, and/or a git repository full of documents.

I replaced my old 1gbs router with a 2.5gbs one from Protectli! It has coreboot which was the ultimate deciding factor for me, even though it came at a premium.

Installing OpenWRT wasn’t difficult, but configuring it correctly to use all the ports took some retries.

I also have been trying to install a pixelfed instance of my own on Podman, but no luck so far; I keep failing at the image building part. I wish they would release images of their own.

Needed more ports for core switch so decided to mess with Cisco. Not because I like or respect that company or need their features but rather to get real world experience with it. This has only reinforced my hatred of them, but it’s currently functional

Also needed to get 10G up, so went with microtik. This is also a curious little system, but at least it wasn’t $10,000 MSRP (Cisco came from eBay). Still need to configure vlans here: thinking I’ll just keep RouterOS but make it not route.

I spent half a day trying to get acme-dns + Cert Warden up and running and failed miserably. And I think I will give up on it. That does not happen usually, but during my debugging sessions I have seen that the acme-dns project is not maintained regularly since quite a while. The current maintainer just has not enough time, but tries to prepare the project for a move to a new GitHub organization, so more people can help with the project. Until then, Issues and PRs accumulate, so I am not sure anymore if I should stick to acme-dns or just do it differently.

Why did I pick this scenario? Because of Let’s Encrypt certificates and my DNS provider does not allow fine-grained API Keys for DNS management. This means, that currently the processes that request certificates in my Network need the API Key for the dns-challenge for Let’s Encrypt.

Ways around that are by either using Let’s Encrypt alternate (I think it is called DNS alias mode) method where you can request Certificates for your main domain, but put the TXT records for the DNS challenge on another Domain. One way is to just use a 2nd Domain for that if you have one.

I tried to do it with a Subdomain of my Main Domain that I delegate to acme-dns. The whole acme-dns, Domain delegation stuff etc. works fine, but I am not able to get this hooked up to Cert Warden properly and end up with error messages that make no sense to me and since I do not find any further information in the logs, as I said, I just gave up yesterday evening… for now ;-)

Another thing I am struggling sometimes is my Pi-Hole + Unbound setup where Unbound for no reason just returns a NXDOMAIN for some queries and I can not figure out why, under which circumstances and when that happens. It just seems to be random and a restart / cache clearing etc. does not fix it.

So, slightly tangential, but I have a failed home automation project this past week.

I have been using an unofficial integration for my mini-splits for a few years. The guy who wrote it likes to disappear for 6 months at a time and it seems like it may be abandoned. It finally stopped working after a home assistant update.

I had bought some ESP based replacement dongles about a year ago and decided to finally use them. Well, not all of the features worked, so I set about writing my own firmware.

That ended up working even less well. I wasted a lot of time and effort trying to get my firmware to work before giving up and just moving to the fork of the original Home Assistant integration for the official dongles.

I hate being beholden to third party stuff like this because I have robust automation setup for my mini-splits and updates can completely break them and be a massive pain to fix.

I’m not sad I tried and failed so much as I’m just sad it didn’t work. I may try again sometime in the future.

I set up Jellyfin, it was easy but I’m only allowing local network access

I have been trying to get my own mastodon instance up and running behind traefik this weekend

I maneged to get it up and running yesterday, but I get some permission errors when trying to upload like a profile image etc.

I found a few issues that sort of mentioned permission errors, but they suggested running chown in the container, which is not possible, and running chown on the linked volume, which looks like an empty folder, and it didn’t solve the issue.

Hoping to fix it when I get back home later.

It’s nice to have something to fiddle with as the world is falling apart around you.

I like this thread :-)

I have just checked off a long standing item in my backlog: implementing OIDC on at least two apps. I’ve used a remote keycloak instance for authention for my household and so far so good. Now I’ll try to understand the configurations a little better before take on other items on my backlog.

I replaced my tabbyml code assistant this week with ollama+continue.dev. But I’m having issues with speed. I think this is because I switched from code qwen 2.5B (ish) to Deepeek Coder 9B (ish) and I think I’m pushing the limits of my GPU. Maybe I’ll spend today sorting out which models I want to use and which computers I want to use them on so I dont run into this issue (I’ve got ollama on 2 computers with 3 GPUs shared between them, for a total of 24GB VRAM)