In my server I currently have an Intel i7 9th gen CPU with integrated Intel video.
I don’t use or need A.I. or LLM stuff, but we use jellyfin extensively in the family.
So far jellyfin worked always perfectly fine, but I could add (for free) an NVIDIA 2060 or a 1060. Would it be worth it?
And as power consumption, will the increase be noticeable? Should I do it or pass?
QuickSync is usually plenty to transcode. You will get more performance with a dedicated GPU, but the power consumption will increase massively.
Nvidia also has a limit how many streams can be transcoded at the same time. There are driver hacks to circumvent that.
Most Intel GPUs are great at transcoding. Reliable, widely supported and quite a bit of transcoding power for very little electrical power.
I think the main thing I would check is what formats are supported. If the other GPU can support newer formats like AV1 it may be worth it (if you want to store your videos in these more efficient formats or you have clients who can consume these formats and will appreciate the reduced bandwidth).
But overall I would say if you aren’t having any problems no need to bother. The onboard graphics are simple and efficient.
If it is working for you as is, no need to make a change
Look up the GPU on these charts to find out what codecs it will support: https://developer.nvidia.com/video-encode-and-decode-gpu-support-matrix-new
NVENC support will tell you what codecs your GPU can generate for client devices, and NVDEC support determines the codecs your GPU can read.
Then compare it with the list of codecs that your Intel can handle natively.
Thanks!
Both the 2060 and the 1060 don’t support AV1 either way, so I guess its pointless to me.
For an old nvidia it might be too much energy drain.
I was also using the integrated intel for video re-encodes and I got an Arc310 for 80 bucks which is the cheapest you will get a new card with AV1 support.
The Intel GPU is probably better
I ran a 1650 super for a while. At idle it added about 10W and would draw 30-40W while transcoding. I ended up taking it out because the increased power wasn’t worth the slight performance increase for me.
Yeah look like a lot… Probably not worth it.
I only have a GPU because my CPU doesn’t have any graphics. I don’t use the graphics anyway, but I need it to boot. So I put our crappiest spare GPU in (GTX 750 Ti) and call it good.
I wouldn’t bother. If you end up needing it, it’ll take like 15 min to get it installed and drivers set up and everything. No need to bother until you actually need it.
Host steam-headless and use the GPU for that so you can have remote gaming on your phone anywhere you have 5G
Cool idea!
THE FOLLOWING IS WRONG!!!
EMBY BAD, JELLYFIN IS OPEN SPURCE, NOT EMBY
Switch to emby
Why?
THE FOLLOWING IS WRONG!!!
EMBY BAD, JELLYFIN IS OPEN SOURCE, NOT EMBY
It’s open source equivalent and won’t enshittify on you, like plex did, like jellyfin will
Is jellyfin getting enshittified? Why you say that? Doesn’t seems like its following plex
THE FOLLOWING IS WRONG!!!
EMBY BAD, JELLYFIN IS OPEN SOURCE, NOT EMBY
As long as it’s not released under a copyleft license, it remains a possibility. That’s not to say they’ve actually done anything untoward, but this is a warning to the people who have been bit by this dynamic one too many times
If and when, I will have plenty of time to migrate. I hate plexification and will indeed switch to emby IF and WHEN.
So far, seems jellyfin is under a copyleft license, so unless they break it, I think I am fine.
And sincerely, jellyfin totally rocks.
I have fucked up!!! It is emby that is closed source fuckkkkkk!!!
“Emby has been relicensed and is now closed-source, while open source components will be moved to plugins. Due to this, a free open source fork of Emby was created called Jellyfin.”
Jellyfin is under the GPLv2 Github
You are right, I have fucked up!! All posted edited
DNW, it happens, but you made me doubt my memort eheheh
