I just went to charge my kitchen scale and it wouldn’t work until I dug out a USB-A -> C cable and plugged it into my desktop…

It just reminded me of how many devices like that I have. This scale, my wife’s sound torc, some car jumperstarters, and I think a one or two more…

I assume it’s because they just slap a usbc port on a dumb 5v circuit that doesn’t have a power negotiation controller. So the cable and the charger cant figure out the power needs of the device are and just never send any.

  • r00ty@kbin.life
    link
    fedilink
    arrow-up
    20
    arrow-down
    1
    ·
    7 days ago

    But wait. Doesn’t this make them both dumb? I’d expect a modern USB-C charger to still support basic 5v low current lazy devices too. If there’s a USB-A to C cable that works, it must also still be possible to send the basic 5v down a C-C cable.

    I also think there’s always going to be a balance between how much a device needs to make and/or how much it needs fast charging to make sense to add the charging circuit for PD/PPS. Even $1-2 on top of the cost can ruin margins in the current electronic market.

    • MyTurtleSwimsUpsideDown@fedia.ioOP
      link
      fedilink
      arrow-up
      10
      ·
      7 days ago

      PD includes a 5v option, so you’d think that chargers would default to a dumb 5v/4.5w with no other input, but apparently not… It’s probably something to do with the overcharge protection, or to not (further) harm a device with a damaged charge controller.

      Or it could be that my PD chargers are pre pandemic and PD 3.1 fixed this.

      • r00ty@kbin.life
        link
        fedilink
        arrow-up
        4
        ·
        7 days ago

        Well, I’d expect that if they allowed 5v through but with a low current limit (I think the default 5v standard states quite a low current allowance). They could catch anything drawing too much and shut the port off until it detects disconnection/other reset.

        I mean, if they’re thinking about protecting a downstream device, adding this logic would make more sense than just not supplying any power unless a negotiation is made.

        In any case, since standard USB ports on a computer will output 5v without anything being negotiated, then it’s really no less safe than any other USB port in that regard.

    • ragebutt@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      8
      ·
      7 days ago

      USB c has active negotiation for power and communication via a cc pin

      The usb a to c cable has a pull up resistor that mimics this and says “give 5v”

      Some usb c chargers have a fallback 5v mode for this scenario but not all do