i recently learned you’re not supposed to run a microwave with nothing in it/it can fry itself broken.

but i want to heat up a plate to help keep the pancakes i put on it warm like they do in diners. putting just a plate in my microwave causes it to start freaking out 'cause i guess there’s not enough stuff in there to absorb the energy(? this is what google tells me).

are the diners just putting the plates on a burner on low? that feels wrong.

    • treadful@lemmy.zip
      link
      fedilink
      English
      arrow-up
      4
      ·
      7 days ago

      You can use any temp, really. There’s a pretty good window of a minute or two for being able to touch them. Just don’t leave them in too long and always use a potholder to pull them out just in case.

    • doug@lemmy.todayOP
      link
      fedilink
      English
      arrow-up
      10
      arrow-down
      10
      ·
      7 days ago

      but that’s so much woooork though! for slightly-warmed plates! i gotta wait for it to heat up just to put a plate in there? my time is too valuable for such lengths!

      …bah, this is probably the right answer.

      • Admiral Patrick@dubvee.org
        link
        fedilink
        English
        arrow-up
        7
        ·
        edit-2
        7 days ago

        I just put them in, set it to 150 (lowest it will go), and set the timer for like 3 minutes. At that low of a temp, it really doesn’t take long to warm the plates. If you’re really in a hurry, you could move the top rack as high as it will go, put the plate there, and set it to broil for 1-2 minutes.

      • Venator@lemmy.nz
        link
        fedilink
        arrow-up
        6
        ·
        edit-2
        7 days ago

        Just put them in before you start making the pancake batter, and you don’t need to wait for it to preheat, actually better not to.

  • BlameThePeacock@lemmy.ca
    link
    fedilink
    English
    arrow-up
    15
    ·
    edit-2
    7 days ago

    If you want to use the microwave for this, pop in a plate with some water, then heat it up for 1-2 minutes, take it out with something that doesn’t absorb water (or the hot water will wick through the material to your hand and burn you) dump the water in the sink and quickly wipe with a dish towel to dry before using.

    Other methods include warming it in an oven set very low, or heating it in hot water from a sink.

    In a restaurant, they may just grab a plate that has just come out of the dishwasher since industrial dishwashers are really fucking hot.

    • doug@lemmy.todayOP
      link
      fedilink
      English
      arrow-up
      6
      ·
      7 days ago

      In a restaurant, they may just grab a plate that has just come out of the dishwasher since industrial dishwashers are really fucking hot.

      I guess part of me knew this was the real reason the plates were hot and not because the diner warmed them up for me.

      • ℕ𝕖𝕞𝕠@slrpnk.net
        link
        fedilink
        arrow-up
        13
        ·
        7 days ago

        Diners put food on a special counter called a “pass” that has heat lamps above it. This keeps the food warm, and the plates warm. Keeps the counter warm, too. A lot of them store plates above the pass, an area that’s also pretty warm all the time.

  • Treczoks@lemmy.world
    link
    fedilink
    arrow-up
    7
    ·
    6 days ago

    Put some water on the plate before putting them into the microwave.

    Microwave heats water, water heats plate.

  • Willem@kutsuya.dev
    link
    fedilink
    arrow-up
    8
    ·
    7 days ago

    Our preferred way of doing this is have a pot of near boiling water with the plate on top next to the pan I’m baking the pancakes on. Pile the pancakes directly on the plate.

    This keeps the plate hot and maintains the temperature of the bottom pancakes while you’re making a larger batch. remove the plate carefully after baking, wipe the bottom of the plate dry and put it on the table. Hot pancakes for the entire meal!

    This is for dutch pancakes BTW, no clue how it would go for American or other more fluffy pancakes.

  • 6️⃣9️⃣4️⃣2️⃣0️⃣@lemmy.world
    link
    fedilink
    English
    arrow-up
    9
    ·
    7 days ago

    In restaurants they keep plates warm under heat lamps. Microwaves don’t actually transfer heat the way heat lamps do. They heat things up by “vibrating” the molecules (it’s more complicated than that, but that’s the idea). Things with less rigid molecular bonds (like liquids) tend to heat faster because the molecules can vibrate more readily. Using the microwave dry can potentially damage things because there isn’t anything to absorb the microwave energy.

  • SomeAmateur@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    8
    ·
    edit-2
    7 days ago

    You’re right the cold plate sucks out a lot of heat! I sit them in hot water and dry them off before putting the food on

  • databender@lemmy.world
    link
    fedilink
    English
    arrow-up
    7
    ·
    7 days ago

    Dig a pit, build a fire there, then once it gets going you cover it with dirt and place your plates in the dirt. Wait about 4 hours and then use a rake to find them. Nice and toasty.

  • Bev's Dad@lemmy.ca
    link
    fedilink
    arrow-up
    8
    ·
    7 days ago

    I put my oven on low when making pancakes to keep them warm until I finish a batch. I guess there’s nothing stopping me from adding empty plates in there before serving.

  • corsicanguppy@lemmy.ca
    link
    fedilink
    English
    arrow-up
    7
    arrow-down
    1
    ·
    7 days ago

    If you’re to the level of warming plates in your pancake game, those must be some kickass flapjacks.

    Flappy flabby fatbastard fluffy flapjacks, ferda.

  • douglasg14b@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    edit-2
    7 days ago

    Options:

    1. Very Wet paper towel on the plate, microwave the plate for 30-60s
    2. Heat it up over a flame, a ways away (ie. Butane torch under it, but like 12" away)
    3. If you have a small countertop over or air fryer/toaster. Heat it up in there briefly
    4. If you’re making toast, place it on top of the toaster (not too long, it can still break).

    You can also use an oven, but that’s a lot of air to heat up for just a plate. If you’re already using it though, that’s a win.

    I heat my plates up alllll the time.