Same. Firefox Mobile had been a laggy mess when I used it a few years ago, but a combination of some really aggressive advertising and the announcement of manifest v3 caused me to give it another shot about a year ago. It’s a dramatic improvement in phone browsing.
The more I’ve thought about it the more I think Pete really is one of the safer candidates in that list. He’s already been vetted at the national level from the 2020 cycle. He’s wicked smart, is a great debater, and from the people who have seen him speak gets people excited. He has a national presence already and doesn’t require giving up a governorship or senate seat.
He won the Iowa caucus in 2020 but because of their whole glitch thing it wasn’t official until days later. Should bring some good Midwest support too being from Indiana and presently living in Michigan.
Anything I’ve listened to with Ray Porter reading it. His intonation is great and just brings that something extra to the stories. In particular Project Hail Mary and the Bobiverse books. He also did Paradox Bound, which felt like a fine time travel story but his portrayal of the voice of the “faceless men” made the character 's menace come to life for me in a way I don’t think would be captured in text.
Prosthetist. I work with patients to make and fit artificial limbs to them.
From the “redirect the vents” side of things, I’ve been doing this manually for the 7 years with no ill effects. Last year I added a Flair system and Ecobee to automatically balance using the registers. They have back pressure detection to prevent damage to the HVAC system so there’s always enough vents open. At least in my scenario it’s been a game changer for the third floor of our townhouse. As we’ve headed into warmer months our bedroom is actually cool in the evenings and the lower floors are normal temperatures. During the winter our living space on the second floor was cozy without blasting the bedrooms and making it too hot to sleep. With the number of vents I had it cost just over 1K to do, but that was way cheaper than it would have been to have the house and system rezoned.
I’m into smarthome stuff so now I’ve actually got room level presence detection going and tying that back to Flair with Home Assistant so we only cool or heat occupied rooms. Wife is a very happy camper in her now temperature controlled office, and it only targets the office when she’s in it.
Lots of good advice here. I’ve got a bunch of older WD Reds still in service (from before the SMR BS). I’ve also had good luck shucking drives from external enclosures as well as decommissioned enterprise drives. If you go that route, depending on your enclosure or power supply in these scenarios you may run into issues with a live 3.3V SATA power pin causing drives to reboot. I’ve never had this issue on mine but it can be fixed with a little kapton tape or a modified SATA adapter. It’s definitely cheaper to shuck or get used enterprise for capacity! I’m running at least a dozen shucked drives right now and they’ve been great for my needs.
Also, if you start reaching the point of going beyond the ports available on your motherboard, do yourself a favor and get a quality HBA card flashed in IT mode to connect your drives. The cheapo 4 port cards I originally tried would have random dropouts in Unraid from time to time. Once I got a good HBA it’s been smooth sailing. It needs to be in IT mode to prevent hardware raid from kicking in so that Unraid can see the individual identifiers of the disks. You can flash it yourself or use an eBay seller like ThArtOfServer who will preflash them to IT mode.
Finally, be aware that expanding your array is a slippery slope. You start with 3 or 4 drives and next thing you know you have a rack and 15+ drive array.
I don’t think I realized that was a limitation because I’ve been using the Vaultwarden fork. https://github.com/dani-garcia/vaultwarden
Same, though I’ve got a couple Decepticons sprinkled in. They all connect to the Allspark ssid.
Ditto. I’ve had mine for over a year now with daily use and it’s been great. Good room for tools, and a dedicated outside pocket for glasses. Inner pocket keeps water bottle in place. Organized device storage that holds 2 laptops, an iPad, Steam Deck, Kindle and travel router. The fact that it fits the exact dimensions under most airplane seats has been clutch for travel.
I had to make a warranty claim this week when some of the zipper teeth separated from the bag for some reason. For all the hubbub around the “trust me bro” warranty, support responded within 2 hours and is sending a completely new bag as a replacement. Top notch support.
There’s a bit more to it than just the Central Perk part. They’ve recreated the apartments and a few other major scenes and have a lot of props from the show. We had just finished a rewatch of the show and found it pretty enjoyable on a rainy day in the city. I think we spent about an hour in there and came out with some cool staged scene pictures. I still thought it was overpriced, but didn’t feel ripped off.
I think about the Ameristan stuff and people being “facebooked” all the time since reading that book. In the time since I read it I feel like we just keep getting closer and closer to that reality.
I’ve been using one for several years now with one of the documented switches that add multiple ports. https://docs.pikvm.org/ezcoo/#connections First in a DIY and then with the v3 hat Kickstarter I guess total I’m at $270 between the Kickstarter HAT and ezcoo switch plus the cost of a Pi (which I already had) I can reach 4 machines over my Tailnet and jump between them reliably. I can also control power on my primary server. (others are on a network managed PDU and can be forcibly reset that way if needed)
I had an old console from a job but it was so old that it required an ancient version of Java to access through the web interface. I’m sure there may be better options, but for my homelab setup the pikvm has worked well at a price that fit in my budget.
I’ve been using obsidian-livesync for a couple months now. Works great cross-platform since it runs directly out of my Vault and doesn’t cost $8/mo. Mine is running on fly.io right now but I may eventually move it to my own machine. https://github.com/vrtmrz/obsidian-livesync/
I can’t help feeling like Obsidian really missed the mark on their pricing here for hobbyist & home users. I can’t justify paying substantially more than something like iCloud or Google Drive storage when I’m using Obsidian to just sync some text and a few documentation images. Something like $1-2/mo would have been an instant buy for me, but at $8 it was worth my time to investigate other ways of syncing.
My aftermarket Openpilot setup does this with a camera pointed at the driver. I’m good about paying attention but apparently if it alerts too many times that you’re distracted it will disable itself until you restart the car.
Perfect analogy. I completely shill for both Bitwarden and Brother printers because they legit are just that good. When I find products like that they’re what I push to my family and friends because they “just work.”
I still miss my OG Pebble sometimes. My wife says her Pebble Round was superior for what she actually uses a smartwatch for vs the Apple Watch she now has. When her Round failed, support quickly - but erroneously - sent her a brand new Time Steel as a replacement. In the midst of us trying to get it swapped for a Round the company shut down. It’s always stuck with me that the customer service was so “good” that they burned through all their cash.
I’ve been on free Beeper since the summer and it’s my primary messaging app now. Support has been personal, quick, and far and above the support I get from a lot of paid services. I just hope they don’t run out of runway, because Beeper is the happiest I’ve been with my messaging setup since Hangouts. I gladly signed up for Mini yesterday and will be happy to retire the used iPhone 8 I was using to keep my Android # active on iMessage.
Per the Beeper CTO, evidently Beeper (cloud) isn’t using the Mac minis anymore for anyone who migrated to their latest bridge. It’s using the same solution, they just didn’t make a big deal out of it at the time. I’ve actually been on the new bridge since early November and haven’t had any issues. In my case the new bridge fixed an issue I was having with SMS forwarding from my iPhone.
It’s pretty much always been this way with the HP ones. Years ago when wireless printers were not the standard, we used to connect a printer to the family Windows PC and then share it on the network. We got a new one set it up, and the printer refused to be shared. Turns out HP had explicitly blocked network sharing in their Windows software driver for that printer. Never purchased another one since. Brother isn’t perfect, but I have multiple 8+ year old Brother laser printers still in service right now and they “Just Work.”
Blocked by a Republican judge.